Current SPAD.neXt Release: 0.9.11.5

This forum has been set to readonly. Helping/Q&A etc is done exclusivly on Discord.

SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
The .Net-Framework used by SPAD.neXt has a faulty configuration (long known by MS, but refused to be fixed) which prevents those older versions to connect to the services now, because old TLS-Protocol has been disabled by Microsoft in latest Windows updates.
If you have trouble updating to latest version because your Windows updated already, you can download the latest installer here and install it over your existing installation.

Honeycomb support?

Discussion about special hardware
Locked
User avatar
pmb
Betatester
Posts: 471
Joined: 15 Jun 2015, 16:47
Location: Jena, Germany
Contact:
Status: Offline

Honeycomb support?

Post by pmb » 08 Sep 2019, 20:12

Will SPAD.neXt get support for the upcoming Honeycomb devices (yoke/quadrant)? These look promising and first reviews are quite positive.

Kind regards, Michael
Prepar3d4 Pro, AeroflyFS2, and others // Intel i7-6700K 4.0 GHz / Asus Z170 / Kingston 32 GB DDR4 / Samsung SSD M.2 500 GB + Samsung SSD 1 TB + Intel SSD 500 GB + WD HD 6 TB / EVGA GTX 970 4 GB / LG 34UM95 3440 x 1440 // Win 10/64

User avatar
c0nnex
Site Admin
Posts: 5465
Joined: 10 Mar 2015, 21:52
Location: Munich, Germany
Contact:
Status: Offline

Re: Honeycomb support?

Post by c0nnex » 16 Sep 2019, 09:17

They should be supported out of the box. If not, as soon someone got hands on it we can have a look.

User avatar
pmb
Betatester
Posts: 471
Joined: 15 Jun 2015, 16:47
Location: Jena, Germany
Contact:
Status: Offline

Re: Honeycomb support?

Post by pmb » 16 Sep 2019, 10:07

Thanks!

Best regards, Michael
Prepar3d4 Pro, AeroflyFS2, and others // Intel i7-6700K 4.0 GHz / Asus Z170 / Kingston 32 GB DDR4 / Samsung SSD M.2 500 GB + Samsung SSD 1 TB + Intel SSD 500 GB + WD HD 6 TB / EVGA GTX 970 4 GB / LG 34UM95 3440 x 1440 // Win 10/64

pelgrin21
Flight Attendant
Posts: 14
Joined: 15 Feb 2020, 00:42
Status: Offline

Re: Honeycomb support?

Post by pelgrin21 » 13 May 2020, 06:40

I got a honeycomb yoke the elevator and pitch are standard axis the switches are also standard you should be able to program them like any ordinary switch

Locked