Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
Problems Since Updates
Forum rules
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
-
- Flight Attendant
- Posts: 39
- Joined: 05 Jul 2016, 08:24
- Location: London
- Status: Offline
Problems Since Updates
I am running P3D v4.5, since the latest spad Next & fip gauge updates i now have these faults
the fip gauges of fip gauges .com are not saving settings especially global settings
the previous and next gauge buttons on the fips are not working
the tuning knobs on the radios are now slow eg one rev of the knob moves the value by one digit
the adjustment knob on the multipanel is also slow same fault as radio panel
i am unable to change values in the range boxes in the BIP settings eg in range min & max
there may be other faults that I have not yet found
Also I notice that the fip side button commands have changed
I am now spending more time re-configureing my settings than I am flying
the fip gauges of fip gauges .com are not saving settings especially global settings
the previous and next gauge buttons on the fips are not working
the tuning knobs on the radios are now slow eg one rev of the knob moves the value by one digit
the adjustment knob on the multipanel is also slow same fault as radio panel
i am unable to change values in the range boxes in the BIP settings eg in range min & max
there may be other faults that I have not yet found
Also I notice that the fip side button commands have changed
I am now spending more time re-configureing my settings than I am flying
Re: Problems Since Updates
Amen brother! Why do I have to reset all the BIP panel windows with each update? Now my panels will not power up/illuminate. Seems we are going backwards with these new commands/events.
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: Problems Since Updates
Nothing has been reset.
no events/commands have been renamed in any of the updates (Just the display string has been altered).
no events/commands have been renamed in any of the updates (Just the display string has been altered).
Re: Problems Since Updates
So why are my bip panels not illuminated now and they were working fine before? I can see the proper condition in light gray, but they are not lit.
Re: Problems Since Updates
Now with latest update my autopilot, power, FIP, Radio Stack and PFD are all off same as BIPs. What is going on?
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: Problems Since Updates
can't see any ticket from you...
- thedazman
- Betatester
- Posts: 1808
- Joined: 28 Mar 2015, 10:47
- Location: United Kingdom
- Contact:
- Status: Offline
Re: Problems Since Updates
If you are referring to fip bip and not saitek bip then Gauges turn off when aircraft voltage is less than the defined off voltage “fg_global_min_voltage” which you can set in the BIP gauge.
If you set min voltage to -1 it turns off voltage sensing, but your aircraft is either not powered up or outputting less volts than fg_global_min_voltage or the power compatibility mode doesn’t match aircraft.
None of the above is new this is how my gauges have been working for a few years now
If you set min voltage to -1 it turns off voltage sensing, but your aircraft is either not powered up or outputting less volts than fg_global_min_voltage or the power compatibility mode doesn’t match aircraft.
None of the above is new this is how my gauges have been working for a few years now
Re: Problems Since Updates
Voltage is fine, has been fine only changes is SPAD I fly the Aerobask E1000 G1000 for X-Plain daily.
Con I was hoping for a solution here and not having to put in a ticket, but I will now.
Con I was hoping for a solution here and not having to put in a ticket, but I will now.
- thedazman
- Betatester
- Posts: 1808
- Joined: 28 Mar 2015, 10:47
- Location: United Kingdom
- Contact:
- Status: Offline
Re: Problems Since Updates
Ah x-plane l, that’s handy, lets me off the hook as I don’t support x-plane my gauges look for simconnect voltage to turn gauges on. My gauges only turn off when Simconnect voltage conditions are not met
Re: Problems Since Updates
Not so Daz, your gauges have been working fine in X-Plane ever since I switched over a year ago! Maybe in spite of you!