I'm looking for programming advise on how to toggle the Altitude Set (laminar/c90/autopilot/switch/altsel100) push/pull knob on the dash using the Logitech Multi Panel's Auto Throttle switch. I've programmed the auto throttle switch to increase/decrease altitude 1000' when switch is OFF and 100' ON just like the Altitude Set knob but I can't command the knob in/out yet to correspond with the multi panel's switch. Any advise?
Systems in use: X Plane 11, King Air C90B Blackhawk, SPAD.neXT 0.9.6.54, DataRefTool, FlyWithLua
Thanks in advance for your help!!!
Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
Multi Panel's AutoThrottle/AltSel Knob Programming
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: Multi Panel's AutoThrottle/AltSel Knob Programming
What does the push/pull do?
Re: Multi Panel's AutoThrottle/AltSel Knob Programming
The knob/dial on the dash changes the preselect altitude increments either 100' or 1000'. "In" I believe was 100' increments, Out for 1000'.
On a "somewhat" unrelated question, I'm trying to see the exact changes taking place when I push/pull the knob through the Event Monitor but every time I press Start, the SPAD.neXT software crashes. Any ideas to remedy this?
Paid member as of today.
On a "somewhat" unrelated question, I'm trying to see the exact changes taking place when I push/pull the knob through the Event Monitor but every time I press Start, the SPAD.neXT software crashes. Any ideas to remedy this?
Paid member as of today.
Re: Multi Panel's AutoThrottle/AltSel Knob Programming
I've got Event Monitor to stop crashing while reviewing YouTube video "Sim-P3Dv4.5 Spad.Next Switch Panel C208B". I wasn't aware of how to delete/stop the event that caused the crash. Now back to the original programming problem...
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: Multi Panel's AutoThrottle/AltSel Knob Programming
Reproduce the crash and open a ticket please.
viewtopic.php?f=4&t=4210
viewtopic.php?f=4&t=4210
Re: Multi Panel's AutoThrottle/AltSel Knob Programming
I no longer have crashing issues as mentioned earlier but would love some help on the original question. Also how do I stop the Auto Throttle from advancing when toggling the Auto Throttle switch on the Autopilot panel even through there's no auto throttle on the C90B? Any direction is greatly appreciated.