Due to relocation there will be slow response to tickets until i have a decent internet line again.

Programmed Buttons not following VAR

Discussion about Problems.
Forum rules
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html

Do NOT hijack other people threads, until you have exactly the same problem!
Locked
User avatar
Steve Horsfall
Betatester
Posts: 42
Joined: 21 Mar 2018, 02:11
Location: Macksville near YNHS,Australia
Status: Offline

Programmed Buttons not following VAR

Post by Steve Horsfall » 02 Mar 2019, 04:52

I programmed a spare button on the Yoke to Increase and Decrease the AP by 500 feet. It was working well until now. The altitude increases and decreases by 10,000 feet!. I deleted the buttons and programmed again. Still the same.
AP VAR.PNG
I changed the variable to 50 feet and the AP jumps by 1000!
AP VAR (50).PNG
any ideas :?
You do not have the required permissions to view the files attached to this post.

AeroRamer
First Officer
Posts: 59
Joined: 01 Oct 2016, 23:06
Contact:
Status: Offline

Re: Programmed Buttons not following VAR

Post by AeroRamer » 02 Mar 2019, 16:07

You say it was working. Do you have the backup profile file you can go back to? Did it just stop working all of the sudden?

So, interesting, 500 jumps by 10,000 and 50 jumps by 1,000? Just curious if Parameter: 25 will jump by 500!

What Sim are you using?

User avatar
Steve Horsfall
Betatester
Posts: 42
Joined: 21 Mar 2018, 02:11
Location: Macksville near YNHS,Australia
Status: Offline

Re: Programmed Buttons not following VAR

Post by Steve Horsfall » 02 Mar 2019, 20:28

Using FSX-Steam. Was working for the last few months, then suddenly went crazy.Also the bug heading on the HSI jumps by about 10 deg instead of 1 when I use the FIP knob. If I use the AP knob all is ok. I do have an old profile backup, i will give that go.

User avatar
Steve Horsfall
Betatester
Posts: 42
Joined: 21 Mar 2018, 02:11
Location: Macksville near YNHS,Australia
Status: Offline

Re: Programmed Buttons not following VAR

Post by Steve Horsfall » 02 Mar 2019, 22:51

Thanks AeroRamer, the old profile works as normal, the buttons still programmed as the profile i deleted. "Strange" :?

AeroRamer
First Officer
Posts: 59
Joined: 01 Oct 2016, 23:06
Contact:
Status: Offline

Re: Programmed Buttons not following VAR

Post by AeroRamer » 02 Mar 2019, 23:01

Cool! It is weird how the world of zeros and ones work!

Locked