Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
Programmed Buttons not following VAR
Forum rules
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
- Steve Horsfall
- Betatester
- Posts: 60
- Joined: 21 Mar 2018, 02:11
- Location: Macksville near YNHS,Australia
- Status: Offline
Programmed Buttons not following VAR
I programmed a spare button on the Yoke to Increase and Decrease the AP by 500 feet. It was working well until now. The altitude increases and decreases by 10,000 feet!. I deleted the buttons and programmed again. Still the same.
I changed the variable to 50 feet and the AP jumps by 1000!
any ideas You do not have the required permissions to view the files attached to this post.
Re: Programmed Buttons not following VAR
You say it was working. Do you have the backup profile file you can go back to? Did it just stop working all of the sudden?
So, interesting, 500 jumps by 10,000 and 50 jumps by 1,000? Just curious if Parameter: 25 will jump by 500!
What Sim are you using?
So, interesting, 500 jumps by 10,000 and 50 jumps by 1,000? Just curious if Parameter: 25 will jump by 500!
What Sim are you using?
- Steve Horsfall
- Betatester
- Posts: 60
- Joined: 21 Mar 2018, 02:11
- Location: Macksville near YNHS,Australia
- Status: Offline
Re: Programmed Buttons not following VAR
Using FSX-Steam. Was working for the last few months, then suddenly went crazy.Also the bug heading on the HSI jumps by about 10 deg instead of 1 when I use the FIP knob. If I use the AP knob all is ok. I do have an old profile backup, i will give that go.
- Steve Horsfall
- Betatester
- Posts: 60
- Joined: 21 Mar 2018, 02:11
- Location: Macksville near YNHS,Australia
- Status: Offline
Re: Programmed Buttons not following VAR
Thanks AeroRamer, the old profile works as normal, the buttons still programmed as the profile i deleted. "Strange"
Re: Programmed Buttons not following VAR
Cool! It is weird how the world of zeros and ones work!