Hi,
I saw a topic regarding TS2017 which was closed due to a lack of response I think...
Well I am very interested. Can I help?
I use SPAD.neXt in my flightsims...
Grz.
Paul
Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
Train Simulator 2018
- Oz Flyer
- Betatester
- Posts: 741
- Joined: 23 Sep 2015, 10:10
- Location: YMMB, Melbourne, Australia
- Contact:
- Status: Offline
Re: Train Simulator 2018
I also are waiting on TS2017 started do some testing but that was as far as it has got so far.
I was even looking at doing some very basic gauge like the ones I did for ETS2/ATS.
I was even looking at doing some very basic gauge like the ones I did for ETS2/ATS.
David
OZ Flyer
Near YMMB
40+ year of Flight Siming.
Sim: subLOGIC/Microsoft Flight Sim's/DTG FSX, Microsoft Flight, DTG Filght School/FSW/Train Sim/TSW, ETS2 & ATS.
Hardware: Logitech, Saitek, Arduino 2560's & Leo's, BBI-32, PAC LED.
OZ Flyer
Near YMMB
40+ year of Flight Siming.
Sim: subLOGIC/Microsoft Flight Sim's/DTG FSX, Microsoft Flight, DTG Filght School/FSW/Train Sim/TSW, ETS2 & ATS.
Hardware: Logitech, Saitek, Arduino 2560's & Leo's, BBI-32, PAC LED.
Re: Train Simulator 2018
I read in that post something about a program (interface) between TS201x and SPAD.neXt.
Do you have that program/interface?
Do you have that program/interface?
- Oz Flyer
- Betatester
- Posts: 741
- Joined: 23 Sep 2015, 10:10
- Location: YMMB, Melbourne, Australia
- Contact:
- Status: Offline
Re: Train Simulator 2018
It is not really an interface it was a stand alone program that reported TS2017 variables and aloud you to set them as well.
Is was not part of SPAD.neXt, I did have some success in using the "Send keyboard command to program" to control TS2017 but it was in NO way reliable, usable sort of at least for testing.
The test program you talk of is only available from c0nnex, I have it as I am a SPAD.neXt beta tester.
Is was not part of SPAD.neXt, I did have some success in using the "Send keyboard command to program" to control TS2017 but it was in NO way reliable, usable sort of at least for testing.
The test program you talk of is only available from c0nnex, I have it as I am a SPAD.neXt beta tester.
David
OZ Flyer
Near YMMB
40+ year of Flight Siming.
Sim: subLOGIC/Microsoft Flight Sim's/DTG FSX, Microsoft Flight, DTG Filght School/FSW/Train Sim/TSW, ETS2 & ATS.
Hardware: Logitech, Saitek, Arduino 2560's & Leo's, BBI-32, PAC LED.
OZ Flyer
Near YMMB
40+ year of Flight Siming.
Sim: subLOGIC/Microsoft Flight Sim's/DTG FSX, Microsoft Flight, DTG Filght School/FSW/Train Sim/TSW, ETS2 & ATS.
Hardware: Logitech, Saitek, Arduino 2560's & Leo's, BBI-32, PAC LED.
Re: Train Simulator 2018
Ok. What to do next to get this further?
- Oz Flyer
- Betatester
- Posts: 741
- Joined: 23 Sep 2015, 10:10
- Location: YMMB, Melbourne, Australia
- Contact:
- Status: Offline
Re: Train Simulator 2018
1) Hope there is enough users out there that want this.
2) Wait for c0nnex to get well and add this to SPAD.neXt
Which will be at least after all the support tickets are done I would think.
2) Wait for c0nnex to get well and add this to SPAD.neXt
Which will be at least after all the support tickets are done I would think.
David
OZ Flyer
Near YMMB
40+ year of Flight Siming.
Sim: subLOGIC/Microsoft Flight Sim's/DTG FSX, Microsoft Flight, DTG Filght School/FSW/Train Sim/TSW, ETS2 & ATS.
Hardware: Logitech, Saitek, Arduino 2560's & Leo's, BBI-32, PAC LED.
OZ Flyer
Near YMMB
40+ year of Flight Siming.
Sim: subLOGIC/Microsoft Flight Sim's/DTG FSX, Microsoft Flight, DTG Filght School/FSW/Train Sim/TSW, ETS2 & ATS.
Hardware: Logitech, Saitek, Arduino 2560's & Leo's, BBI-32, PAC LED.