Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
FLIGHTSIMLABS A320
FLIGHTSIMLABS A320
Hello
I have the FSLABS320 software
I have as hardware for FSX the saitek panel, radio panel, and multipanel. I would like to know if I bought SPAD.NEXT . I could use my panels with this addon (fslabs a320).
regards,
hernando
I have the FSLABS320 software
I have as hardware for FSX the saitek panel, radio panel, and multipanel. I would like to know if I bought SPAD.NEXT . I could use my panels with this addon (fslabs a320).
regards,
hernando
- MichaelBrowning
- Passenger
- Posts: 6
- Joined: 14 Oct 2015, 04:26
- Location: Australia
- Status: Offline
Re: FLIGHTSIMLABS A320
I have the aerosoft A320 and spad works great with them. I have all the panels.
Sent from my LG-H860 using Tapatalk
Sent from my LG-H860 using Tapatalk
Re: FLIGHTSIMLABS A320
Hello,
I have also the aerosoft and the fslabs A320 -> for the fslabs a320 I didnt found any profile to use my saitek hardware...
Did anyone make profiles for saitek panels and would to share it to use ist with fslabs a320X ?
Thanks and best regards
rentasad
I have also the aerosoft and the fslabs A320 -> for the fslabs a320 I didnt found any profile to use my saitek hardware...
Did anyone make profiles for saitek panels and would to share it to use ist with fslabs a320X ?
Thanks and best regards
rentasad
Re: FLIGHTSIMLABS A320
Hello everybody,
if someone has created a profile please tell me,
thank you,
regards
if someone has created a profile please tell me,
thank you,
regards
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: FLIGHTSIMLABS A320
Currently for the FSLabs A320 no documentation about LVARS or any other SDK is availbale. FSLabs stated they will maybe add that in a later version.
For a start you can check this thread (http://forums.flightsimlabs.com/index.p ... -controls/), how to program some stuff using the ROTOR_BRAKE Simulation-Event
If there are enough requests, I'll implement some of the stuff directly into SPAD.neXt
For a start you can check this thread (http://forums.flightsimlabs.com/index.p ... -controls/), how to program some stuff using the ROTOR_BRAKE Simulation-Event
If there are enough requests, I'll implement some of the stuff directly into SPAD.neXt
Re: FLIGHTSIMLABS A320
I've got the FSLabs A320 so anything that goes into SPAD direct is a bonus, although I'm more concerned about finding the 3D printer files for the tiller now I've my Leo Bodnar board working for the nose wheel steering.
Saitek add-ons: Cessna Yoke & Rudder, 2 Throttle Quadrants, 1 TPM, 1 Multi Panel, 1 Switch Panel, 2 Radio Panel, 1 BIP, 9 FIP's
DIY add-ons: Parking Brake. Work-In-Progress: Throttle Quadrant
DIY add-ons: Parking Brake. Work-In-Progress: Throttle Quadrant
Re: FLIGHTSIMLABS A320
Hi cOnnex, Please consider this a REQUEST!c0nnex wrote:Currently for the FSLabs A320 no documentation about LVARS or any other SDK is availbale. FSLabs stated they will maybe add that in a later version.
For a start you can check this thread (http://forums.flightsimlabs.com/index.p ... -controls/), how to program some stuff using the ROTOR_BRAKE Simulation-Event
If there are enough requests, I'll implement some of the stuff directly into SPAD.neXt
I would love more functionality for my Saitek RP/MP and SP using FSLabs A320.
Many Thanks!
TWIVEZY
Saitek HW: ProFlight Yoke (upgraded with springs and a LeoBodnar JC), 2 TQs, 2 RPs, MP, SP
Other HW: MFG rudderpedals, Logitech Extreme 3D Joystick, DIY A320 glareshield (WIP; 3 BBI32s and 2 PACLED64s)
Other HW: MFG rudderpedals, Logitech Extreme 3D Joystick, DIY A320 glareshield (WIP; 3 BBI32s and 2 PACLED64s)
Re: FLIGHTSIMLABS A320
Hi everyone!
I managed to assign some of the above mentioned ROTOR_BRAKE Simulator Events to my normal joystick buttons using registered FSUIPC. I would like to use my Saitek panels to do the same. Is there an (easy) way of performing this task?
Thanks for any guidance!
I managed to assign some of the above mentioned ROTOR_BRAKE Simulator Events to my normal joystick buttons using registered FSUIPC. I would like to use my Saitek panels to do the same. Is there an (easy) way of performing this task?
Thanks for any guidance!
Saitek HW: ProFlight Yoke (upgraded with springs and a LeoBodnar JC), 2 TQs, 2 RPs, MP, SP
Other HW: MFG rudderpedals, Logitech Extreme 3D Joystick, DIY A320 glareshield (WIP; 3 BBI32s and 2 PACLED64s)
Other HW: MFG rudderpedals, Logitech Extreme 3D Joystick, DIY A320 glareshield (WIP; 3 BBI32s and 2 PACLED64s)
Re: FLIGHTSIMLABS A320
Has anyone had any luck making their Multi and Radio panel useful? I get very mixed results when using default SIMCONNECT snippets for Com1 and 2. Outside of that, I'm useless haha
Re: FLIGHTSIMLABS A320
Yup with the rotor brake codes from the FSLabs 320 forum you can assign almost everything (FCU and EFIS) to the multipanel.
Saitek HW: ProFlight Yoke (upgraded with springs and a LeoBodnar JC), 2 TQs, 2 RPs, MP, SP
Other HW: MFG rudderpedals, Logitech Extreme 3D Joystick, DIY A320 glareshield (WIP; 3 BBI32s and 2 PACLED64s)
Other HW: MFG rudderpedals, Logitech Extreme 3D Joystick, DIY A320 glareshield (WIP; 3 BBI32s and 2 PACLED64s)