Hi Ulrich,
Do not know how much control you have over the display?
Can you please look to see if you can split the upper and lower lines of the display in ALT & VS modes where it displays 2 lines. So they can be configured like the Left and Right displays on the radio Panel.
Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
Multi Panel Display
- Oz Flyer
- Betatester
- Posts: 741
- Joined: 23 Sep 2015, 10:10
- Location: YMMB, Melbourne, Australia
- Contact:
- Status: Offline
Multi Panel Display
David
OZ Flyer
Near YMMB
40+ year of Flight Siming.
Sim: subLOGIC/Microsoft Flight Sim's/DTG FSX, Microsoft Flight, DTG Filght School/FSW/Train Sim/TSW, ETS2 & ATS.
Hardware: Logitech, Saitek, Arduino 2560's & Leo's, BBI-32, PAC LED.
OZ Flyer
Near YMMB
40+ year of Flight Siming.
Sim: subLOGIC/Microsoft Flight Sim's/DTG FSX, Microsoft Flight, DTG Filght School/FSW/Train Sim/TSW, ETS2 & ATS.
Hardware: Logitech, Saitek, Arduino 2560's & Leo's, BBI-32, PAC LED.
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: Multi Panel Display
The current implementation handles each selector position as one display.
With the Conditions in 0.9 you are able to change the values displayed depending on conditions.
E.g. for VS-Display: if Selector = alt then display Ground Elevation [in VS line]
If the selector is in ALT or VS Position both Display-Conditions are active.
In all other positions only the Selector-Position-Display is active.
Due to limitations of the device, the second line is displayed only in ALT and VS Position. Also the "prefix" is not changeable.
With the Conditions in 0.9 you are able to change the values displayed depending on conditions.
E.g. for VS-Display: if Selector = alt then display Ground Elevation [in VS line]
If the selector is in ALT or VS Position both Display-Conditions are active.
In all other positions only the Selector-Position-Display is active.
Due to limitations of the device, the second line is displayed only in ALT and VS Position. Also the "prefix" is not changeable.