Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
Controlling Feelthere / Wilco Airbusses
Controlling Feelthere / Wilco Airbusses
Hi , as I am an enthusiastic FT Airbus pilot, I need to controle the altitude by my Multi Panel (MP).
I had no success with the old SPAD and I hoped to make it now with SPAD.Next.
I can configure with the FT Airbus configuration tool the keyboard assignment of increase/ decrease altitude.
When I configure these keyboard assignment in MP altitude by SPAD, it's NOT working.
Other assignment e.g. "select heading managed" works perfect with other MP buttons.
B.t.w. Heading on MP works fine with the airbus!
Any ideas whats going wrong ??? Is the problem the rotary switch "Altitude" ??
Regards
Alhard (EDDN)
PC pilot since 1980
I had no success with the old SPAD and I hoped to make it now with SPAD.Next.
I can configure with the FT Airbus configuration tool the keyboard assignment of increase/ decrease altitude.
When I configure these keyboard assignment in MP altitude by SPAD, it's NOT working.
Other assignment e.g. "select heading managed" works perfect with other MP buttons.
B.t.w. Heading on MP works fine with the airbus!
Any ideas whats going wrong ??? Is the problem the rotary switch "Altitude" ??
Regards
Alhard (EDDN)
PC pilot since 1980
best regards
....Alhard (EDDN)
PC pilot since 1980, WIN7, FS9+FSX+P3DV4, 3 PCs, 6 Monitors, IVAO
....Alhard (EDDN)
PC pilot since 1980, WIN7, FS9+FSX+P3DV4, 3 PCs, 6 Monitors, IVAO
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: Controlling Feelthere / Wilco Airbusses
To check on this, you need to provide a logfile and the used profile.
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: Controlling Feelthere / Wilco Airbusses
Wilco Airbus will be supported natively (like PMDG) by the registered Version of SPAD.neXt.
Started working on it today.
Started working on it today.
Re: Controlling Feelthere / Wilco Airbusses
Great, thanks.
I already started to test some functions with Eric Marcianos FS-Exporter and the FS-Interrogate Tool with my Airbus.
But the Offsets didn't work properly. Dont know why. I will continue my investigations and let you know.
Eventually by PM in German.
I already started to test some functions with Eric Marcianos FS-Exporter and the FS-Interrogate Tool with my Airbus.
But the Offsets didn't work properly. Dont know why. I will continue my investigations and let you know.
Eventually by PM in German.
best regards
....Alhard (EDDN)
PC pilot since 1980, WIN7, FS9+FSX+P3DV4, 3 PCs, 6 Monitors, IVAO
....Alhard (EDDN)
PC pilot since 1980, WIN7, FS9+FSX+P3DV4, 3 PCs, 6 Monitors, IVAO
Re: Controlling Feelthere / Wilco Airbusses
How can I get the registered version?
best regards
....Alhard (EDDN)
PC pilot since 1980, WIN7, FS9+FSX+P3DV4, 3 PCs, 6 Monitors, IVAO
....Alhard (EDDN)
PC pilot since 1980, WIN7, FS9+FSX+P3DV4, 3 PCs, 6 Monitors, IVAO
-
- Betatester
- Posts: 483
- Joined: 24 May 2015, 12:02
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: Controlling Feelthere / Wilco Airbusses
@alihor: guess that's not released yet.
Ulrich, do you have plans to add also some special support for the AeroSoft Airbus products?
I didn't played a lot with them currently, therefore I didn't tested to use them with SPAD.neXt till now, but I think AeroSoft uses LVars there. Anyway, a default profile for the AeroSoft airbus products would be great, of course.
Ulrich, do you have plans to add also some special support for the AeroSoft Airbus products?
I didn't played a lot with them currently, therefore I didn't tested to use them with SPAD.neXt till now, but I think AeroSoft uses LVars there. Anyway, a default profile for the AeroSoft airbus products would be great, of course.
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: Controlling Feelthere / Wilco Airbusses
The areosoft airbus uses LVARS indeed. LVARS will be supported by the registered version of SPAD.neXt.
Since I'm an Aerosoft Airbus Fan myself, expect a premade profile for it
Since I'm an Aerosoft Airbus Fan myself, expect a premade profile for it
-
- Betatester
- Posts: 483
- Joined: 24 May 2015, 12:02
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: Controlling Feelthere / Wilco Airbusses
That's great to hear, thanks!
Re: Controlling Feelthere / Wilco Airbusses
do you already have an idea, how to simulate with the Saitek modules the "PULL and PUSH" functionality of the FCU knobs?
best regards
....Alhard (EDDN)
PC pilot since 1980, WIN7, FS9+FSX+P3DV4, 3 PCs, 6 Monitors, IVAO
....Alhard (EDDN)
PC pilot since 1980, WIN7, FS9+FSX+P3DV4, 3 PCs, 6 Monitors, IVAO
-
- Betatester
- Posts: 483
- Joined: 24 May 2015, 12:02
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: Controlling Feelthere / Wilco Airbusses
Guess you could e. g. use "short click" vs. "long click" for that.
But maybe Ulrich even has some better ideas on that.
Andreas
But maybe Ulrich even has some better ideas on that.
Andreas