Hi,
Could you add an option to tune the sensitivity the rotatory button on the multipanel?
The altitude or heading setting is hard to do sharply
Thanks
Orangina
Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
Sensivities on MultiPanel
Forum rules
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
-
aeronauta
- Betatester
- Posts: 556
- Joined: 13 Mar 2015, 03:06
- Location: Melbourne Australia YMMB
- Status: Offline
Re: Sensivities on MultiPanel
I second that, the trimwheel Sensitivity seems to work well (I have it at 10) but the encoder seems to still go jumpimg by 20 30 units from time to time as you slowly move it...
Jorge
Jorge
-
thedazman
- Betatester
- Posts: 1808
- Joined: 28 Mar 2015, 10:47
- Location: United Kingdom
- Contact:
- Status: Offline
Re: Sensivities on MultiPanel
It's certainly better than it was, but the acceleration SEEMS to kick in after a certain time of spinning and not the speed of spinning, if that's even possible to detect.
The up shot is you can be turning slowly for a while and the acceleration SEEMS to kick in. I wouldn't expect slow turning to accelerate.
The shut down of acceleration on reversal has helped but even when you rewind slowly for a little while it seems to accelerate again.
If I had the choice of having it as it is or no acceleration I'll take it the way it's is currently any day.
The up shot is you can be turning slowly for a while and the acceleration SEEMS to kick in. I wouldn't expect slow turning to accelerate.
The shut down of acceleration on reversal has helped but even when you rewind slowly for a little while it seems to accelerate again.
If I had the choice of having it as it is or no acceleration I'll take it the way it's is currently any day.
