Hello,
I'm a little bit desperate.
If I assign a switch, the basic control is retained. When I put the ATC on the light switch, the ATC goes on, but so does the light.
How can I delete or block the basic settings?
Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
pro switch panel
Forum rules
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
-
- Passenger
- Posts: 4
- Joined: 08 Mar 2021, 17:40
- Status: Offline
Re: pro switch panel
no one knows what I mean?! Or how do you manage that?
Re: pro switch panel
Are you trying to replace the default action (IE: turning on the light) or assign a new command alongside it? (open ATC)
To remove the default action just highlight it and click 'Delete Action' then add your new command. See screenshot below.
If you want to run this command alongside the existing one, it can be done by making use of the conditions.
For me, I wouldn't set two commands on this type of switch.
Pete.
To remove the default action just highlight it and click 'Delete Action' then add your new command. See screenshot below.
If you want to run this command alongside the existing one, it can be done by making use of the conditions.
For me, I wouldn't set two commands on this type of switch.
Pete.
You do not have the required permissions to view the files attached to this post.
I'm Pete, AKA: Redscouse, owner and creator of Scouse Airlines.
Since MS2000, I've been tinkering with liveries, missions and scenery etc.
Check out the download section of my website and grab some free stuff!
Since MS2000, I've been tinkering with liveries, missions and scenery etc.
Check out the download section of my website and grab some free stuff!
-
- Passenger
- Posts: 4
- Joined: 08 Mar 2021, 17:40
- Status: Offline
Re: pro switch panel
My actions list is empty, but the stobes are working with this switch. And if I add an action to the list, the new action works, but strobes go on too.
I don‘t know how to delete the default.
Device settings are all on (send initial switches, swap r/l... and Virtual Power Support)
I don‘t know how to delete the default.
Device settings are all on (send initial switches, swap r/l... and Virtual Power Support)
-
- Passenger
- Posts: 4
- Joined: 08 Mar 2021, 17:40
- Status: Offline
Re: pro switch panel
I got it. Problem was a driver I installed for the panel.
Re: pro switch panel
Good to see you got it working.
I'm Pete, AKA: Redscouse, owner and creator of Scouse Airlines.
Since MS2000, I've been tinkering with liveries, missions and scenery etc.
Check out the download section of my website and grab some free stuff!
Since MS2000, I've been tinkering with liveries, missions and scenery etc.
Check out the download section of my website and grab some free stuff!