Hello, when I start SPADnext, all six FIP button lights are OFF.
A button light becomes “active” (light on) only by pressing it and becomes inactive (light off) pressing again.
Is there a way to have button lights ALWAYS turned on ?
Thank you
Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
FIP button lights always on
Forum rules
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
-
- Passenger
- Posts: 4
- Joined: 24 Dec 2020, 05:27
- Status: Offline
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: FIP button lights always on
a) A Gauge must be loaded to the FIP to be able to control the lights. If needed i can provide a "Blank" Gauge
b) Add Virtual PowerOn event to the FIp:
* Click on ON/OFF Icon upper right
* Add Event -> Device Power Event (Will be executed if vittual power of devices changes)
* Add Condition : Local -> System -> "SPAD.neXt System Status" equals "1" (Spad is ready to rock)
* Add Action -> Change Button Light -> Select Fip and Button and desired Led-State
b) Add Virtual PowerOn event to the FIp:
* Click on ON/OFF Icon upper right
* Add Event -> Device Power Event (Will be executed if vittual power of devices changes)
* Add Condition : Local -> System -> "SPAD.neXt System Status" equals "1" (Spad is ready to rock)
* Add Action -> Change Button Light -> Select Fip and Button and desired Led-State
-
- Passenger
- Posts: 4
- Joined: 24 Dec 2020, 05:27
- Status: Offline
Re: FIP button lights always on
Thank you very much c0nnex, I appreciated your kind answer!
Now it's OK
Now it's OK
-
- Passenger
- Posts: 4
- Joined: 24 Dec 2020, 05:27
- Status: Offline
Re: FIP button lights always on
Is there a way to set virtual power always on?
I turned "virtual power on" in settings - devices - saitek fips but it doesn't seem to work
I turned "virtual power on" in settings - devices - saitek fips but it doesn't seem to work
-
- Passenger
- Posts: 4
- Joined: 24 Dec 2020, 05:27
- Status: Offline
Re: FIP button lights always on
Ok I solvedSergio1956 wrote: ↑06 Jan 2021, 14:05Is there a way to set virtual power always on?
I turned "virtual power on" in settings - devices - saitek fips but it doesn't seem to work
I add action ---- virtual power on
All OK
thanks again