HI,
Following the update I have noticed that with my BIP since the upgrade any condition where the light was set to blink, once the condition no longer exists the lights continue flashing, unlike with the previous SPAD version, where when condition stopped so the light.
Just to clarify let's say STALL condition was set to to flash red when met and stop when out of the STALL condition. Now the light continues to blink even when out of STALL condition.
The fix around I found was to change to a solid colour, in this case solid red. It works properly but only when set to a solid colour.
ANy suggestions, greatly appreciated.
Thank you,
Mike
Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
BIP blinking conditions.
Forum rules
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
-
c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: BIP blinking conditions.
Please open a ticket from inside SPAD.neXt. I'll have a look