Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
BIP Gear Unsafe
Forum rules
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
-
- Flight Attendant
- Posts: 39
- Joined: 05 Jul 2016, 08:24
- Location: London
- Status: Offline
BIP Gear Unsafe
Since the latest update the GEAR UNSAFE snippet no longer works on the Saitek BIP panel, the gear unsafe indicator stays on all the time once it has been activated and does not go off even if the gear unsafe commands are deleted
Cheers
SmiffyRebel
Cheers
SmiffyRebel
- thedazman
- Betatester
- Posts: 1808
- Joined: 28 Mar 2015, 10:47
- Location: United Kingdom
- Contact:
- Status: Offline
Re: BIP Gear Unsafe
Might need to adjust the condition. I found sometime the gear doesn’t go to 0 or 100% so set to 1-99%.
I can’t remember the exact condition code but pull the thresholds in slightly on each end of the check
Daz
I can’t remember the exact condition code but pull the thresholds in slightly on each end of the check
Daz
- thedazman
- Betatester
- Posts: 1808
- Joined: 28 Mar 2015, 10:47
- Location: United Kingdom
- Contact:
- Status: Offline
Re: BIP Gear Unsafe
You need to check all condition against actual output.
There should be an off if = 0 or =100 should be able to nudge the condition values.
I had same issue with my BIP gauge and had to adjust the thresholds slightly.
Let me know if still having issues and I’ll check those snippets on my Saitek BIP panel, pretty certain my unsafe goes out again think this is because car doesn’t go to 0 but goes to a long decimal like 0.000241246
Daz
There should be an off if = 0 or =100 should be able to nudge the condition values.
I had same issue with my BIP gauge and had to adjust the thresholds slightly.
Let me know if still having issues and I’ll check those snippets on my Saitek BIP panel, pretty certain my unsafe goes out again think this is because car doesn’t go to 0 but goes to a long decimal like 0.000241246
Daz
-
- Flight Attendant
- Posts: 39
- Joined: 05 Jul 2016, 08:24
- Location: London
- Status: Offline
Re: BIP Gear Unsafe
It would seem that the OFF command is not working properly, if you add a second action "BIP Row 3 Col 8 to GREEN" in the "actions to be executed" window it briefly goes green and then goes OFF
Cheers
SmiffyRebel
Cheers
SmiffyRebel
-
- Flight Attendant
- Posts: 39
- Joined: 05 Jul 2016, 08:24
- Location: London
- Status: Offline
Re: BIP Gear Unsafe
I've now found that the eng oil temp snippet does not work properly, I wonder how many others there are
Cheers
SmiffyRebel
Cheers
SmiffyRebel
Re: BIP Gear Unsafe
Got the same problem with the Engine Oil Pressure alsoSmiffyRebel wrote: ↑08 Dec 2020, 17:23I've now found that the eng oil temp snippet does not work properly, I wonder how many others there are
Cheers
SmiffyRebel
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: BIP Gear Unsafe
Problem is addressed by current Beta 0.9.9.6 and will be pushed to release asap.
-
- Flight Attendant
- Posts: 39
- Joined: 05 Jul 2016, 08:24
- Location: London
- Status: Offline
Re: BIP Gear Unsafe
Okay
Thanks for the reply also sorry about raising a ticket for unable to register and putting it on the forum
Cheers
SmiffyRebel
Thanks for the reply also sorry about raising a ticket for unable to register and putting it on the forum
Cheers
SmiffyRebel