Recently updated to 0.9.8.45 and was excited to see added functionality for the TCA Quadrant. When configuring I am not seeing any delta in the axis values for the TQ. I am seeing changes in X/Y/Z for the side stick but not the throttle slider on the stick too. I do have the TM TCA drivers installed.
Any recommended changes?
Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
TCA Q-Eng axis issue
Forum rules
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
TCA Q-Eng axis issue
You do not have the required permissions to view the files attached to this post.
-.- . ...- .. -.
Kevin Conlon
Pharmacist, Pilot and Parrot Head
Kevin Conlon
Pharmacist, Pilot and Parrot Head
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: TCA Q-Eng axis issue
Beta Feedback in Discord Only please.
Already fixed.
Already fixed.
Re: TCA Q-Eng axis issue
Please help...
how to make curves for q-eng axes work in mfs2020?
how to make curves for q-eng axes work in mfs2020?
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: TCA Q-Eng axis issue
Click on Handle -> Axis Configuration -> Edit Resonse curve
Re: TCA Q-Eng axis issue
I do so
but no changes to the simulator
the throttle value changes linearly
but no changes to the simulator
the throttle value changes linearly
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: TCA Q-Eng axis issue
If you assign the axis in the sim, you need to adjust axis in the sim.
If you want spad to use the response cureve etc, you will need to unassign it in the sim, and add the axis actions to spad.next
If you want spad to use the response cureve etc, you will need to unassign it in the sim, and add the axis actions to spad.next