Page 1 of 2

X-Plane Log Error

Posted: 09 Jan 2019, 08:01
by Rodbittar
Hi Folks,

I'm X-PLANE 11 user and I've have downloaded the complete version (trial) to manage my FIP's (I have three) and, so far, the software (SPAD.NEXT) is working as expected.

However, by looking in the X-Plane Log, I noticed SPAD.NEXT error that occurs repeatedly (hundreds times). I mean, the log is full of these same error (below):

at SPAD.neXt.Base.SPADBackgroundWorker.worker_DoWork(Object arg)
SPAD::WARN ServiceProxy: Connection closed
SPAD::ERROR Internal.BackgroundWorker: XPLMWorker [6]: Error in delegate: NetworkCommsDotNet.ConnectionSetupException: Error during TCP connection establish with destination ([TCP-E-S] 0.0.0.0:0 -> 127.0.0.1:8181). Destination may not be listening or connect timed out. System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 127.0.0.1:8181

at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)

at System.Net.Sockets.TcpClient.EndConnect(IAsyncResult asyncResult)

at NetworkCommsDotNet.Connections.TCP.TCPConnection.ConnectSocket()

at NetworkCommsDotNet.Connections.TCP.TCPConnection.ConnectSocket()

at NetworkCommsDotNet.Connections.TCP.TCPConnection.EstablishConnectionSpecific()

at NetworkCommsDotNet.Connections.Connection.EstablishConnection()

at NetworkCommsDotNet.Connections.TCP.TCPConnection.GetConnection(ConnectionInfo connectionInfo, SendReceiveOptions defaultSendReceiveOptions, TcpClient tcpClient, Boolean establishIfRequired, SSLOptions sslOptions)

at NetworkCommsDotNet.Connections.TCP.TCPConnection.GetConnection(ConnectionInfo connectionInfo, Boolean establishIfRequired)

at XPlane10.SPADServiceProxy.CheckConnection()

at XPlane10.ServiceWorker.BackgroundProcessingDoWork(ISPADBackgroundThread workerThread, Object argument)


Does anyone know how to fix this error?

Thanks,

Re: X-Plane Log Error

Posted: 09 Jan 2019, 14:29
by c0nnex
You will need to enable Remote Connections in SPAD.neXt , and maybe need change the port accordingly to teh port SPAD.neXt has chosen.
https://www.spadnext.com/discover/how-t ... plane.html

Re: X-Plane Log Error

Posted: 12 Jan 2019, 05:16
by Rodbittar
c0nnex wrote:
09 Jan 2019, 14:29
You will need to enable Remote Connections in SPAD.neXt , and maybe need change the port accordingly to teh port SPAD.neXt has chosen.
https://www.spadnext.com/discover/how-t ... plane.html
Hi cOnnex,

I've edit the file "SPADneXtConnector.sdm" (according to instructions in the link above) and since SPAD.NEXT and X-PLANE are NOT running on different computers I let the "LocalConnection: true” and replace only "ServerHost": to match my machine's IP.

However, It didn't work. So, I've run the wizard again just to make sure that SPAD.NEXT would understand that I was not running it on a remote connection but It didn’t work either. The X-PLANE LOG continued to show that same message multiple times, as you can see in the X-PLANE LOG attached (at the lower part of the Log).

Could you help me to find the problem?

Thanks,

Re: X-Plane Log Error

Posted: 15 Jan 2019, 17:31
by c0nnex
Check Settings->Application->Expert in SPAD.neXt what port it states for the Remote-Connection. You need to set that one in the SPADneXtConnector.sdm

Re: X-Plane Log Error

Posted: 16 Jan 2019, 04:09
by Rodbittar
c0nnex wrote:
15 Jan 2019, 17:31
Check Settings->Application->Expert in SPAD.neXt what port it states for the Remote-Connection. You need to set that one in the SPADneXtConnector.sdm
It's set 8181, the same port that is set in SPADneXtConnector.sdm. Just to inform that I'm running SPAD.NEXT and X-PLANE in LOCAL connection (same computer).

Re: X-Plane Log Error

Posted: 16 Jan 2019, 12:23
by c0nnex
Open a ticket pplease. I'll have a look at the SPAD.neXt logs. Assumingly the port is blocked/used by another application and SPAD.neXt does not detect that

Re: X-Plane Log Error

Posted: 17 Jan 2019, 23:11
by Rodbittar
c0nnex wrote:
16 Jan 2019, 12:23
Open a ticket pplease. I'll have a look at the SPAD.neXt logs. Assumingly the port is blocked/used by another application and SPAD.neXt does not detect that
I'm afraid I can not open the ticket because I'm still in the trial period (but I'm willing to buy it after trial).

By the way, do you think this error could be happening because I'm using TRIAL (complete) version?

Re: X-Plane Log Error

Posted: 18 Jan 2019, 11:36
by c0nnex
No the trial is identical to the complete edition license.
Please send SPAD.log from %APPDATA%\SPAD:neXt\Logs to support at spadnext.com

Re: X-Plane Log Error

Posted: 22 Jan 2019, 05:54
by Rodbittar
I just opened the ticket. I opened within the SPAD.NEXT itself since now I have a registered license (I bought yesterday after the trial period has ended).

Thanks!

Re: X-Plane Log Error

Posted: 22 Jan 2019, 20:27
by BasementFlyGuy
Please post what you learn here, Rodbittar, as I have the same issue. Many thanks.