I have the latest version of SPAD.next
I have an issue with Saitek Multi Panel.
When I start the spad.next, the aircraft is on ground power.
However there is no display in the panel, spad.next had powered off displayed on top of the image of the panel, till I go into spad.next and turn virtual power on.
It happens every time I start a flight, and need to go into spad.next and turn virtual power on.
Happens only with pmdg 747 v3, the NGX works perfectly fine (I.e. Display is lit etc).
Anyone faced similar issue and what was the fix ?.
Thanks
Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
PMDG QOTS II and P3D v4
Forum rules
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
-
- Captain
- Posts: 272
- Joined: 31 Jul 2015, 01:07
- Status: Offline
Re: PMDG QOTS II and P3D v4
The constraint in your profile for power is probably tied to something that the 747 does not have-- or does but it never actually turned to a 1.
- thedazman
- Betatester
- Posts: 1808
- Joined: 28 Mar 2015, 10:47
- Location: United Kingdom
- Contact:
- Status: Offline
Re: PMDG QOTS II and P3D v4
Just re-program the virtual power to come on with the PMDG power supply
737 example condition [PMDG737:1000:024D] greater then 0 power on. I don't have the 747 so I don't know what the LVAR is for the QOS DC voltage bus.
Daz
737 example condition [PMDG737:1000:024D] greater then 0 power on. I don't have the 747 so I don't know what the LVAR is for the QOS DC voltage bus.
Daz