Hello I would like to program the switches B1 and B2 on my Yoke to trim down/up.
So far the trim up works ok.
The trim down (b1) causes the yoke to move forward. I don't see the trimwheel in the plane turn with this command.
Trim functions ok with the multipanelwheel.
Plane is AS Twotter.
P3Dv4.1
Spad all betas.
Anyone plz?
Grz.
Paul
Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
Trim malfunction
Forum rules
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html
Do NOT hijack other people threads, until you have exactly the same problem!
Re: Trim malfunction
Disregard.
Assigned ELEV_Down in stead of ELEV_TRIM down.
Sorry.
Grz.
Paul
Assigned ELEV_Down in stead of ELEV_TRIM down.
Sorry.
Grz.
Paul
-
thedazman
- Betatester
- Posts: 1808
- Joined: 28 Mar 2015, 10:47
- Location: United Kingdom
- Contact:
- Status: Offline
Re: Trim malfunction
FYI
There is an issue with simconnect elevator trims when incrementing, The Simulation events you are using are unaffected but very slow.
I have an open ticket for the simconnect elevator data definition increments not working properly
Daz
There is an issue with simconnect elevator trims when incrementing, The Simulation events you are using are unaffected but very slow.
I have an open ticket for the simconnect elevator data definition increments not working properly
Daz
