Current SPAD.neXt Release: 0.9.12.123

This forum has closed. Please join our Discord Community.

SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5

Configuse Keyboardkey

Discussion about Problems.
Forum rules
If you have technical Problem, please open a ticket: https://www.spadnext.com/discover/how-to/get-help.html

Do NOT hijack other people threads, until you have exactly the same problem!
Locked
gbg_ice
Passenger
Posts: 7
Joined: 10 Sep 2015, 22:16
Status: Offline

Configuse Keyboardkey

Post by gbg_ice » 23 Jan 2017, 17:47

Before the update this command works fine! But now nothing happens! Look like no key signal sent too software!
I have add sound ad that works fine and the lamps turn on och off!
Add keyboardkey.png
What do I wrong now?

Or something els that I have too change as well?

Best Regards
///Kenny "icE"
You do not have the required permissions to view the files attached to this post.

User avatar
c0nnex
Site Admin
Posts: 5469
Joined: 10 Mar 2015, 21:52
Location: Munich, Germany
Contact:
Status: Offline

Re: Configuse Keyboardkey

Post by c0nnex » 23 Jan 2017, 20:38

I don not know Star Citizen. It might be that you need to select "Active Window" as target.

gbg_ice
Passenger
Posts: 7
Joined: 10 Sep 2015, 22:16
Status: Offline

Re: Configuse Keyboardkey

Post by gbg_ice » 24 Jan 2017, 17:38

c0nnex wrote:I don not know Star Citizen. It might be that you need to select "Active Window" as target.

I already have try "Active Window" and same issu!

But all works fine before the last update! Both "Active Window" and "Star Citizen"
I use them both and different commends!

I have try to uninstall and install new!

Just need too know, so I can get it work before I buy a license from you! :)
Looks great so far :D

User avatar
c0nnex
Site Admin
Posts: 5469
Joined: 10 Mar 2015, 21:52
Location: Munich, Germany
Contact:
Status: Offline

Re: Configuse Keyboardkey

Post by c0nnex » 24 Jan 2017, 23:03

Did you enable the Networkk-Mode in SPAD.neXt maybe?

Nothing has changed to the mechanics how the key is sent.

gbg_ice
Passenger
Posts: 7
Joined: 10 Sep 2015, 22:16
Status: Offline

Re: Configuse Keyboardkey

Post by gbg_ice » 27 Jan 2017, 23:34

c0nnex wrote:Did you enable the Networkk-Mode in SPAD.neXt maybe?

Nothing has changed to the mechanics how the key is sent.

I have test install it one more time!
I have delete the profile and make new one!

I try both Device settings for Switch panel to set them off line and on line!

I have try use same command from Multi Panel as well and nothing happens from that panel as well!

All command that goto BIP panel works great! and sound is play if I have that active!

I have look for Network-Mode in SPAD.neXt and only found in setting/Application/Expert/ Network installation -I try too have on and off!

I don´t know what more I can change too get it work so it send keyboard command!

Anyone have and good suggestions that I can try!
Thank you all for your support!


Best Regards
Kenny

User avatar
c0nnex
Site Admin
Posts: 5469
Joined: 10 Mar 2015, 21:52
Location: Munich, Germany
Contact:
Status: Offline

Re: Configuse Keyboardkey

Post by c0nnex » 27 Jan 2017, 23:54

I triple checked and there is NO change to the keyboard code since over a year.

Can you confirm the Switch Panel is working at all? e.g. the switches move in the UI ?

If it still does not work please open a ticket. (http://www.spadnext.com/discover/how-to/get-help.html)

sabre
Passenger
Posts: 6
Joined: 29 Nov 2016, 02:02
Status: Offline

Re: Configuse Keyboardkey

Post by sabre » 03 Feb 2017, 23:22

I'm having a similar issue. The control button, in this case its on a Thrustmaster MFD, is recognized as being pushed by spad.next. As soon as I configure it to a keyboard event and save it spad.next no longer recognizes that the button on the MFD is being pressed. Even after deleting the action the button is not recognized. I'm on 0.9.5.66.

User avatar
c0nnex
Site Admin
Posts: 5469
Joined: 10 Mar 2015, 21:52
Location: Munich, Germany
Contact:
Status: Offline

Re: Configuse Keyboardkey

Post by c0nnex » 04 Feb 2017, 02:00

Please note, that the UI is sometimes too slow to show that the button was pressed. UI is neglected for the sake of performance. so sometimes it just falls off the world border ;)
The only way to really check if the button-press arrives at SPAD.neXt is to monitor the according Local-Variable in the ata Monitor. if this variable does not change, then the press is not arriving. in this case, please open a ticket.

sabre
Passenger
Posts: 6
Joined: 29 Nov 2016, 02:02
Status: Offline

Re: Configuse Keyboardkey

Post by sabre » 05 Feb 2017, 04:46

I looked at the event monitor and that's exactly what was happening. Thanks.

Locked