Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
[HOW TO] Set up a basic radio panel
[HOW TO] Set up a basic radio panel
Hi
I've documented the various settings needed to set up a standard Saitek Radio Panel from 'scratch'.
The settings for each of the functions are in a pdf document.
There doesn't seem to be a facility to load it on to the forum for you to download,
so
If you want a copy please contact me.
You might find it useful to see what functions you need to use.
Regards
Peter
I've documented the various settings needed to set up a standard Saitek Radio Panel from 'scratch'.
The settings for each of the functions are in a pdf document.
There doesn't seem to be a facility to load it on to the forum for you to download,
so
If you want a copy please contact me.
You might find it useful to see what functions you need to use.
Regards
Peter
Re: [HOW TO] Set up a basic radio panel
I'd love a copy of that. If my email doesn't come through, try a PM.
Sent from my iPad
Sent from my iPad
-
- Passenger
- Posts: 1
- Joined: 26 Jan 2016, 01:18
- Status: Offline
Re: [HOW TO] Set up a basic radio panel
I would like to see what you have. I have most of the functions working but am unable to get com 1 swap working, com 2, nav 1 and 2 work great. I have the Kholsman window displaying next to the xponder but I can't get it to adjust, xponder works fine. Also I'm unable to get DME functions working. Thanks and if I can be of any help let me know. I have three radio panels, com 1 & 2, nav 1 & 2, Bari & xponder and dual DME. I also have the switch panel, multi panel and BIP panel. The switch and BIP are fully functional, haven't messed with the multi panel yet. Also have the TPM and two throttle quadrants. Want to use the quads for light dimmers, cabin heat, vent and defrost. Thanks again, Kris.
Three radio panels, switch panel, multi panel, BIP, TPM, two throttle quadrants, Cessna yolk and rudder pedals all Saitek. Flap switch and fuel switch from Desktop Aviator. Two monitors and two IPads. All strapped to Volair is simpit in an RV!
Re: [HOW TO] Set up a basic radio panel
Hi,
I would like a copy of this if possible?
Thanks in advance
Scott
I would like a copy of this if possible?
Thanks in advance
Scott
-
- Passenger
- Posts: 5
- Joined: 13 Feb 2016, 18:26
- Status: Offline
Re: [HOW TO] Set up a basic radio panel
Hi Solo86,
I've just bought a Radio Panel (should arrive this morning) and would be very pleased to get a copy of your job ...
Thanks in advance
Marc
I've just bought a Radio Panel (should arrive this morning) and would be very pleased to get a copy of your job ...
Thanks in advance
Marc
Re: [HOW TO] Set up a basic radio panel
Hi! Solo86,
I would really appreciate a copy of the instructions!
Thank You and Best Regards!
MikeS Aplus10
aplus10@cableone.net
I would really appreciate a copy of the instructions!
Thank You and Best Regards!
MikeS Aplus10
aplus10@cableone.net
Mike Shields / Aplus10
Registered Owner
Registered Owner
-
- Captain
- Posts: 272
- Joined: 31 Jul 2015, 01:07
- Status: Offline
Re: [HOW TO] Set up a basic radio panel
Why not just use Dropbox and post a link to the shared document?
-
- Flight Attendant
- Posts: 10
- Joined: 11 Apr 2016, 20:36
- Location: Macau/Portugal
- Status: Offline
Re: [HOW TO] Set up a basic radio panel
I'd also appreciate one, thanks!
MG
MG
-
- Passenger
- Posts: 2
- Joined: 13 Apr 2016, 11:43
- Location: YLTV
- Status: Offline
Re: [HOW TO] Set up a basic radio panel
Hi Peter,
If you have the time, I also would like a copy. I too have 3 radios but am completely lost with the programming. I seem to be reasonably good at construction but Lost when it comes to the programming side of things. I'm in the process of building a flight deck 737 using PMDG but having downloaded the profile, I've become somewhat frustrated with what to do next.
I note that with the PMDG, the landing gear lever doesn't bring the gear down - is it me or the system. Apparently the Multipanel digits do not display given the idiosynchrasises of PMDG. While I think that the designer of SpadNext should be placed in the same mould as Peter Dowson, I would more than happy to pay or donate for a complete working arrangement with PMDG.
I suppose that this is the wrong forum to discuss the latter aspect but I would appreciate you forwarding your hard work so I can get additional knowledge. Thankyou for your time.
regards Stu
bnsf001@gmail.com
2 x Mulitpanel, 3 x FIP, 2 x BIP, 3 x Radio, 1 xSwitch Panel, 2 x Yoke, 2 x Rudder, 2 x Throttle Quadrant. PMDG 737
If you have the time, I also would like a copy. I too have 3 radios but am completely lost with the programming. I seem to be reasonably good at construction but Lost when it comes to the programming side of things. I'm in the process of building a flight deck 737 using PMDG but having downloaded the profile, I've become somewhat frustrated with what to do next.
I note that with the PMDG, the landing gear lever doesn't bring the gear down - is it me or the system. Apparently the Multipanel digits do not display given the idiosynchrasises of PMDG. While I think that the designer of SpadNext should be placed in the same mould as Peter Dowson, I would more than happy to pay or donate for a complete working arrangement with PMDG.
I suppose that this is the wrong forum to discuss the latter aspect but I would appreciate you forwarding your hard work so I can get additional knowledge. Thankyou for your time.
regards Stu
bnsf001@gmail.com
2 x Mulitpanel, 3 x FIP, 2 x BIP, 3 x Radio, 1 xSwitch Panel, 2 x Yoke, 2 x Rudder, 2 x Throttle Quadrant. PMDG 737
MWald Air
(aka Whiteknuckle Air)
(aka Whiteknuckle Air)