SPAD.neXt

That's what I was looking at but had not found any that had the displays.
Very strange when I was searching Littebird did not come up and this is not the first time google has not found local sites but oversea friends have.

Have you tried this one? - Teensy 3.5 $39.50 AUD, inc GST

Hope it helps.

Thanks again for the link.
Its not the board its the displays that may be the problem but no need to do anything there until Ulrich works out which board and display to use or if its user choice for display size.

OldAirmail did you get my PM?

Here's a size compare betweek the 2 TFT Displays and FIP.
The non-Touch is definitly too small for a gauge , the 2.8 touch looks ok size-wise.
Unfortunately i was not able to get the display(s) running, without the connector board. So I ordered those. I'll update when they arrived.

TFT screens are available at Jaycar here in NZ so i suspect they will be available at the Oz web site also.

Oz Flyer wrote:Thanks again for the link.
Its not the board its the displays that may be the problem but no need to do anything there until Ulrich works out which board and display to use or if its user choice for display size.

OldAirmail did you get my PM?

Hi Ulrich,
When you have time can you gives us the X & Y of the 2.8 LCD display area in mm if you can.
Then I can cut paper to size and lay over FIP's to get the real size dif.