Custom FIP

Discussion about special hardware
User avatar
Oz Flyer
Betatester
Posts: 676
Joined: 23 Sep 2015, 10:10
Location: YMMB, Melbourne, Australia
Contact:
Status: Offline

Re: Custom FIP

Post by Oz Flyer » 29 Dec 2016, 02:30

That's what I was looking at but had not found any that had the displays.
Very strange when I was searching Littebird did not come up and this is not the first time google has not found local sites but oversea friends have.
David
OZ Flyer
Near YMMB
40+ year of Flight Siming.
subLOGIC/Microsoft Flight Sim/DTG, Microsoft Flight, DTG FSW.

User avatar
OldAirmail
Donator
Posts: 172
Joined: 10 Mar 2015, 22:00
Status: Offline

Re: Custom FIP

Post by OldAirmail » 29 Dec 2016, 06:01

Have you tried this one? - Teensy 3.5 $39.50 AUD, inc GST

Hope it helps.
1 Saitek Switch Panel, 1 Radio Panel, 1 Multi Panel, 1 BIP, 1 FIP,
1 Saitek Rudder Pedal,
1 Saitek Throttle, 1 Saitek TPM, 1 Desktop Aviator GPS, 1 CH Yoke


Registered

Image

User avatar
Oz Flyer
Betatester
Posts: 676
Joined: 23 Sep 2015, 10:10
Location: YMMB, Melbourne, Australia
Contact:
Status: Offline

Re: Custom FIP

Post by Oz Flyer » 29 Dec 2016, 07:06

Thanks again for the link.
Its not the board its the displays that may be the problem but no need to do anything there until Ulrich works out which board and display to use or if its user choice for display size.

OldAirmail did you get my PM?
David
OZ Flyer
Near YMMB
40+ year of Flight Siming.
subLOGIC/Microsoft Flight Sim/DTG, Microsoft Flight, DTG FSW.

User avatar
c0nnex
Site Admin
Posts: 4884
Joined: 10 Mar 2015, 21:52
Location: Munich, Germany
Contact:
Status: Offline

Re: Custom FIP

Post by c0nnex » 03 Jan 2017, 13:55

Here's a size compare betweek the 2 TFT Displays and FIP.
The non-Touch is definitly too small for a gauge , the 2.8 touch looks ok size-wise.
IMG_0197.JPG

Unfortunately i was not able to get the display(s) running, without the connector board. So I ordered those. I'll update when they arrived.
You do not have the required permissions to view the files attached to this post.

zkiwi
Captain
Posts: 139
Joined: 10 Oct 2015, 03:52
Status: Offline

Re: Custom FIP

Post by zkiwi » 03 Jan 2017, 20:33

TFT screens are available at Jaycar here in NZ so i suspect they will be available at the Oz web site also.


Oz Flyer wrote:Thanks again for the link.
Its not the board its the displays that may be the problem but no need to do anything there until Ulrich works out which board and display to use or if its user choice for display size.

OldAirmail did you get my PM?

User avatar
Oz Flyer
Betatester
Posts: 676
Joined: 23 Sep 2015, 10:10
Location: YMMB, Melbourne, Australia
Contact:
Status: Offline

Re: Custom FIP

Post by Oz Flyer » 04 Jan 2017, 01:17

Hi Ulrich,
When you have time can you gives us the X & Y of the 2.8 LCD display area in mm if you can.
Then I can cut paper to size and lay over FIP's to get the real size dif.
David
OZ Flyer
Near YMMB
40+ year of Flight Siming.
subLOGIC/Microsoft Flight Sim/DTG, Microsoft Flight, DTG FSW.

Locked