Page 1 of 1
Multi Panel button LED not working
Posted: 10 Apr 2020, 01:29
by waterman981
The LED under the HDG button has stopped illuminating for me. Both in sim and just using the test functionality in SPAD.next all the buttons activate correctly, including HDG, it just doesn't illuminate. I pulled it apart and didn't see any obvious signs of damage to components. Anyone ever repaired this part?
Re: Multi Panel button LED not working
Posted: 10 Apr 2020, 06:50
by Oz Flyer
Will be looking at soon my APR has same problem
Re: Multi Panel button LED not working
Posted: 10 Apr 2020, 07:17
by waterman981
Here's a picture with the lights on:
https://i.imgur.com/Wes4i6h.jpg
And lights off:
https://i.imgur.com/dIVA1es.jpg
The back side:
https://i.imgur.com/7dfHR4B.jpg
As you can see the switches and LED's are through hole, but there is some surface mount components on the back side. So the heading switch button is just left of D19, with the LED just left of it.
I hope you have luck fixing yours and have some advice.
