Hi there, wonder why are my planes veering abruptly to the right just after touch down without control.
The airplane is inclined to the right and the left wing lifted. During taxi the rudders sort of flick and its difficult to keep a straight line.
I am using SPAD.next latest version, P3Dv4 $ windows10
Using Saitek Pro Flight Rudder Pedals, Saitek dual quadrant Yoke, with B737 levers
Appreciate a reply
Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
Saitek Rudder Pedals
Re: Saitek Rudder Pedals
In addition to the above:
Because the right wing touches ground sort of a flame shows.
Engines are not on fire
All of this happns whilst flying with the AP
If I do the same route and land manually, everything seems to work fine.
No abrupt veering to the right, reverse thrust functioning normally.Plane stops normally when rudder pedal pushed to brake
Because the right wing touches ground sort of a flame shows.
Engines are not on fire
All of this happns whilst flying with the AP
If I do the same route and land manually, everything seems to work fine.
No abrupt veering to the right, reverse thrust functioning normally.Plane stops normally when rudder pedal pushed to brake
-
- Captain
- Posts: 272
- Joined: 31 Jul 2015, 01:07
- Status: Offline
Re: Saitek Rudder Pedals
So you're trying to "auto land" the airplane?
Which aircraft are you doing this with?
Which aircraft are you doing this with?
- thedazman
- Betatester
- Posts: 1808
- Joined: 28 Mar 2015, 10:47
- Location: United Kingdom
- Contact:
- Status: Offline
Re: Saitek Rudder Pedals
If you are belting down the runway on landing with AP on and heading set to ILS frequency, what happens when you pass pass the signal, will the aircraft try and turn?
Daz
Daz
Re: Saitek Rudder Pedals
I remember that in FSX the brakes where set to reverse? however I am not to sure of this.
Anyhow, I did this with SPAD.next, the abrupt veering to the right dissapeared? but now it is very difficult to keep a straight line during taxi, plane does strange movements to the right and to the left
Settings I havefor both pedals are:
Max Brake: 127
No Brake : 0
Invert Axis: ON
And for the rudder;
Full right: 511
Center: 255
Full left: 0
Invert axis: ON
Anyhow, I did this with SPAD.next, the abrupt veering to the right dissapeared? but now it is very difficult to keep a straight line during taxi, plane does strange movements to the right and to the left
Settings I havefor both pedals are:
Max Brake: 127
No Brake : 0
Invert Axis: ON
And for the rudder;
Full right: 511
Center: 255
Full left: 0
Invert axis: ON