Current SPAD.neXt Release: 0.9.12.123
This forum has closed. Please join our Discord Community.
SPAD.neXt online services are no longer available for SPAD.neXt Versions < 0.9.11.5
Request for USB Controller Support
-
- Captain
- Posts: 272
- Joined: 31 Jul 2015, 01:07
- Status: Offline
Re: Request for USB Controller Support
What about something like this? Seems like multiple driver options or none and you have to program it via your own products??
http://www.chromationsystems.com/store/ ... cts_id=298
Supports RGB or Mono LEDs
http://www.chromationsystems.com/store/ ... cts_id=298
Supports RGB or Mono LEDs
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: Request for USB Controller Support
haha . exactly the device i suggested to Oz
-
- Captain
- Posts: 272
- Joined: 31 Jul 2015, 01:07
- Status: Offline
Re: Request for USB Controller Support
So will it be seen by SPAD? If so which software controller do I order? Or do I order the none option?c0nnex wrote:haha . exactly the device i suggested to Oz
Les
- Oz Flyer
- Betatester
- Posts: 741
- Joined: 23 Sep 2015, 10:10
- Location: YMMB, Melbourne, Australia
- Contact:
- Status: Offline
Re: Request for USB Controller Support
Seeing it seems like its more then just me now asking about the boards, Ulrich are you able to support both controller firmware versions?
16 RGB outputs per board is not many and lots of indicators are just on/off no color change needed.
16 RGB outputs per board is not many and lots of indicators are just on/off no color change needed.
David
OZ Flyer
Near YMMB
40+ year of Flight Siming.
Sim: subLOGIC/Microsoft Flight Sim's/DTG FSX, Microsoft Flight, DTG Filght School/FSW/Train Sim/TSW, ETS2 & ATS.
Hardware: Logitech, Saitek, Arduino 2560's & Leo's, BBI-32, PAC LED.
OZ Flyer
Near YMMB
40+ year of Flight Siming.
Sim: subLOGIC/Microsoft Flight Sim's/DTG FSX, Microsoft Flight, DTG Filght School/FSW/Train Sim/TSW, ETS2 & ATS.
Hardware: Logitech, Saitek, Arduino 2560's & Leo's, BBI-32, PAC LED.
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: Request for USB Controller Support
I'm currently in contact with them to ask about the USB protocol specifications.
I'll let you know as soon as i received a reply.
I'll let you know as soon as i received a reply.
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: Request for USB Controller Support
Sometimes things move fast
I am in contact with the developer of that board.
He told me that this board is no longer produced and is going out of lifecycle, however there is a new product he provides:
http://www.nledshop.com/pixelion/
https://www.nledshop.com/index.php?main ... ucts_id=33
Which is able to achieve what you want to do (building your own BIP )
LED Pixes that can be used see e.g.
https://www.nledshop.com/index.php?main ... ucts_id=47
or
https://www.nledshop.com/index.php?main ... &cPath=2_7
The controller uses a custom serial protocol, but i'm ready implement it...
Up to 170 RGB-Pixels ( = BIP with 170 Plates ) are supported. Only very small soldering to wire up the LED-Pixels would be needed: The developer offered me a noticeable discount for the controller for our special purpose (dropping the accelerator as they are not needed). If there is interest in build custom BIP using this controller, I'll negotiate the price with him.
Taking the list prices to build a BIP ( 24 Pixels ) without Housing and power supply:
Controller $25 + 5x $8 (25 Pixels selfsoldering) = $65
Controller $25 + 50Pixel no soldering Strand $50 = $75
Amazing list price already imho. I'll ask him for a SPAD.neXt bundle price for Stripped down controller + 50Pixel Strand.
So if guys are interested .... Let me know
I am in contact with the developer of that board.
He told me that this board is no longer produced and is going out of lifecycle, however there is a new product he provides:
http://www.nledshop.com/pixelion/
https://www.nledshop.com/index.php?main ... ucts_id=33
Which is able to achieve what you want to do (building your own BIP )
LED Pixes that can be used see e.g.
https://www.nledshop.com/index.php?main ... ucts_id=47
or
https://www.nledshop.com/index.php?main ... &cPath=2_7
The controller uses a custom serial protocol, but i'm ready implement it...
Up to 170 RGB-Pixels ( = BIP with 170 Plates ) are supported. Only very small soldering to wire up the LED-Pixels would be needed: The developer offered me a noticeable discount for the controller for our special purpose (dropping the accelerator as they are not needed). If there is interest in build custom BIP using this controller, I'll negotiate the price with him.
Taking the list prices to build a BIP ( 24 Pixels ) without Housing and power supply:
Controller $25 + 5x $8 (25 Pixels selfsoldering) = $65
Controller $25 + 50Pixel no soldering Strand $50 = $75
Amazing list price already imho. I'll ask him for a SPAD.neXt bundle price for Stripped down controller + 50Pixel Strand.
So if guys are interested .... Let me know
You do not have the required permissions to view the files attached to this post.
- c0nnex
- Site Admin
- Posts: 5469
- Joined: 10 Mar 2015, 21:52
- Location: Munich, Germany
- Contact:
- Status: Offline
Re: Request for USB Controller Support
Nota Bene:
I ordered the controller + 48 LEDs Strip , for implementation. So you can expect that controller being supported soon.
($69 including shipping to Germany .... That's 2 BIP wich would be $250+ in total )
I ordered the controller + 48 LEDs Strip , for implementation. So you can expect that controller being supported soon.
($69 including shipping to Germany .... That's 2 BIP wich would be $250+ in total )
- Oz Flyer
- Betatester
- Posts: 741
- Joined: 23 Sep 2015, 10:10
- Location: YMMB, Melbourne, Australia
- Contact:
- Status: Offline
Re: Request for USB Controller Support
Hi Ulrich,
Thank you for your work and I would be looking at Controller + 50Pixel no soldering Strand.
I await the price you may be able to get us and how to let them know we are from the group.
May also be looking at a full system of 170 for my Christmas lights.
Thank you for your work and I would be looking at Controller + 50Pixel no soldering Strand.
I await the price you may be able to get us and how to let them know we are from the group.
May also be looking at a full system of 170 for my Christmas lights.
David
OZ Flyer
Near YMMB
40+ year of Flight Siming.
Sim: subLOGIC/Microsoft Flight Sim's/DTG FSX, Microsoft Flight, DTG Filght School/FSW/Train Sim/TSW, ETS2 & ATS.
Hardware: Logitech, Saitek, Arduino 2560's & Leo's, BBI-32, PAC LED.
OZ Flyer
Near YMMB
40+ year of Flight Siming.
Sim: subLOGIC/Microsoft Flight Sim's/DTG FSX, Microsoft Flight, DTG Filght School/FSW/Train Sim/TSW, ETS2 & ATS.
Hardware: Logitech, Saitek, Arduino 2560's & Leo's, BBI-32, PAC LED.
-
- Captain
- Posts: 272
- Joined: 31 Jul 2015, 01:07
- Status: Offline
Re: Request for USB Controller Support
Yup these are cool!!! Glad I waited to order the other board
Re: Request for USB Controller Support
Hi
Will i be able to run the Q400 Korrys / Korry lights with this card? How far away is the support for the card?
I have a little project going on here. http://myq400.com
Will i be able to run the Q400 Korrys / Korry lights with this card? How far away is the support for the card?
I have a little project going on here. http://myq400.com