Page 1 of 1

Multi Panel Long Click Indication

Posted: 31 May 2015, 11:53
by thedazman
Just setup Glide Slope Hold on the Multi Panel REV Long Click, First time I've used a long click on the Multi Panel.

I was wondering if there was any way you could indicate the long click was enabled on the panel by blinking the button, perhaps not on off on off on off, perhaps on on on off, on on on off ?

Just an idea, wasn't sure if it was feasible or desired. You couldn't make it change colour could you :-) ha ha

Thoughts ?

Daz

Re: Multi Panel Long Click Indication

Posted: 31 May 2015, 15:31
by c0nnex
Thought about blinking myself as well .... I'll see

Re: Multi Panel Long Click Indication

Posted: 03 Feb 2016, 03:19
by Vadermike777
That sounds like a very good idea, i would be interested in seeing that change as well. I for example, use long click to program one of the multi panel buttons to wing leveler. It would be great to see it blank when it's enabled, and i agree an on on on off, fashion would be ideal, instead of straight blinking.

Re: Multi Panel Long Click Indication

Posted: 03 Feb 2016, 18:38
by c0nnex
This is implemented for a long time already.

Short On = LED on
Long On = Led blinks 1x /second
Long + Short on = Led blinks 3x/Second