Page 1 of 1

Repeat event

Posted: 23 Oct 2015, 15:41
by Orangina
Hi,

Trying to make a setup for PMDG737, I find a request feature. To have a repeat option for an action.
Example for PMDG, you have to click twice the left button on the landing gear button to lower the gear.
So if I put for the "gear down" action, "simulation control" PMDG737 "Gear lever" single click left mouse button, it's only unlock the gear not down, it have to be done twice.
If there was the repeat option (with a timer), I think we could use it to repeat the action twice with half a second between the two action.

Orangina

Re: Repeat event

Posted: 23 Oct 2015, 18:13
by c0nnex
I'll look into that. You can achieve that right now, but adding a second action to the gear down event. But I don't know if the PMDG will handle it correctly if two Lever-Commands coming in short sequence.

Re: Repeat event

Posted: 23 Oct 2015, 22:13
by Orangina
Already try, it doesn't work.

Re: Repeat event

Posted: 23 Oct 2015, 22:39
by c0nnex
OK then I'll look into control-macros

Re: Repeat event

Posted: 16 Feb 2016, 12:24
by c0nnex
Will be implemented in 0.9