Changing "VIEW_CAMERA_SELECT"
Posted: 15 Mar 2021, 10:30
I have one Magneto switch left and I have the following settings for this:
Off ==> Send VIEW_CAMERA_SELECT_3-Event (Parameter: 1) and returns "Outside - Locked spot
R ==> Send VIEW_CAMERA_SELECT_1-Event (Parameter: 1) and returns Cockpit - Virtual Cockpit
L ==> Send VIEW_CAMERA_SELECT_2-Event (Parameter: 1) and returns Cockpit - Cockpit
These three settings works well.
On one aircraft (Caranado XL560 Citation) ==> Send VIEW_CAMERA_SELECT_4-Event (Parameter: 1) displays the "Outside - Top/Down" position.
The other aircraft (A2A Beechcraft Bonanza V35B) returns a richt wing view.
How can I
a. change this in a "Outside - Top/Down" view
b. make a new view for the fith position "Magneto - start"
I can't get the explanation in Prepar3D learning Center clear.
How and where do I arrange these VIEW_CAMERA_SELECT positions / settings.
Who can help me with a good explanation and / or solution?
Off ==> Send VIEW_CAMERA_SELECT_3-Event (Parameter: 1) and returns "Outside - Locked spot
R ==> Send VIEW_CAMERA_SELECT_1-Event (Parameter: 1) and returns Cockpit - Virtual Cockpit
L ==> Send VIEW_CAMERA_SELECT_2-Event (Parameter: 1) and returns Cockpit - Cockpit
These three settings works well.
On one aircraft (Caranado XL560 Citation) ==> Send VIEW_CAMERA_SELECT_4-Event (Parameter: 1) displays the "Outside - Top/Down" position.
The other aircraft (A2A Beechcraft Bonanza V35B) returns a richt wing view.
How can I
a. change this in a "Outside - Top/Down" view
b. make a new view for the fith position "Magneto - start"
I can't get the explanation in Prepar3D learning Center clear.
How and where do I arrange these VIEW_CAMERA_SELECT positions / settings.
Who can help me with a good explanation and / or solution?